PRODUCT

Carbonization is an important part of mechanism charcoal. The carbonization process is the core of the production technology of mechanism charcoal. Like building a building. A good material is that the foundation of the building is the underground part. The carbonization technology in the carbonization process is the above-ground part of the building. Carbonization is divided into three stages: low-temperature discharge, high-temperature calcination, and cooling. When the salary rod enters the carbonization furnace, it contains about 80% moisture, which is the enemy of carbonization. Because the mechanism salary rod is afraid of being damp, the moisture in the salary rod will seriously affect the carbonization quality. Because some dehumidification time is essential. Damp time is essential. The moisture removal time is generally 10-15 hours for an earth kiln, and 2-3.5 hours for a machine-made kiln. A long heating time can prevent the fire rod from cracking due to moisture and ensure the quality of carbonization. When the furnace temperature rises to 300 degrees, a large amount of combustible gas can be produced in the furnace. It is reasonable to say that every kilogram of raw materials can produce three cubic meters of methane gas. These gases can be used to raise the temperature in the furnace. Exhaust the heat source available for drying. Above 400 degrees is heat preservation. The calcination stage needs to be sealed and anaerobic. Close the fire, which can be taken from spontaneous combustion or water cooling. After the charcoal leaves the kiln, it must be ventilated before the charcoal is released to prevent carbon dioxide poisoning. The charcoal out of the kiln should be placed outdoors for more than 8 hours. Prevent the ashes from resurfacing and causing a fire.

the raw materials can be palm tree leaves, this palm tree is popular in middle east,and africa.after carbonizating, it will be kind of charcoal powder already, cause it is very light and easy to be carbonizated.

check how to operate the horizontal carbonization furnace step by step:

1,easy to operate,very easy for workers to put the woods into, just open the door and then seal it

2, high capacity and good quality final charcoal

• 

  Cans paint removal furnace equipment

  for more info
• 

  wood log Biochar making machine

  for more info
• 

  Palm tree horizontal carbonization furnace

  for more info